INCH-POUND A-A-50112B June 26, 2000
SUPERSEDING A-A-50112A
February 21, 1990
COMMERCIAL ITEM DESCRIPTION
PITON, MOUNTAIN, ANGLE
The General Services Administration has authorized the use of this Commercial Item
Description for all Federal agencies.
1. SCOPE. This commercial item description covers the requirements for pitons to be used to provide security for personnel or equipment in operations involving steep ascents by driving the pitons into cracks in rock.
2. CLASSIFICATION. The angle mountain pitons shall be of the following types:
Type I - 4-1/4 inches long, 5/8 inch thick Type II - 5-5/8 inches long, 3/4 inch thick Type III - 5-5/8 inches long, 1-1/4 inches thick
3. SALIENT CHARACTERISTICS.
3.1 Design and construction. The pitons shall be chromium-molybdenum alloy 4130 steel. The piton shall be capable of withstanding a force of 2700 pounds when tested as specified in paragraph 3.5. The finish shall be black oxide. The manufacturer's identification symbol shall be permanently marked on the pitons. The pitons shall be similar to figure I, which is for illustrative purposes only and is not intended to preclude procurement of pitons otherwise meeting all the requirements of this document.
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DSCP-COET, 700 Robbins Ave, Philadelphia, PA 19111-5096.
AMSC N/A FSC 8465
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business