A-A-55077A
Any mend, darn, patch, or splice, any drill hole in fabric, hems twisted or pleated, any part of stitching
attaching handle and handle reinforcements to body not stitched through body reinforcement. Edges of
grip section overlapped, ends of carrying strap not finished as specified, pocket and pocket flap not
attached to body of bag as specified, snap fastener components misplaced or not properly aligned
failing to effect a smooth and secure closure. Ends of strap not finished as specified; any part of
stitching requiring attaching nylon webbing to body of bag not stitched through body and reinforcement,
shoulder adjustment strap not caught in between bottom and body, finished length of closing strap is
longer or shorter than specified dimension and applicable plus or minus tolerance.
4.2.2 Attachment of grommets and fasteners defects. Adapter improperly set or fails to function
properly; grommets improperly set with washer on inside of bag; holes not punched to receive
grommets or fasteners; grommet fails to accommodate keeper; clinched excessively tight cutting fabric
or insecurely clinched, i.e., grommet or washer becomes disengaged; clinched loosely, allowing
grommet to rotate in hole; roll of grommet contains more than three scores (splits); grommet not
completely surrounded by grommet reinforcement patch; grommet set off center of hem by more than ¼
inch; any score (splits) exceeding 1/16 inch in length; keeper improperly set or located; snap fastener
has improper or insecure clinching; clinched excessively tight, cutting adjacent material; clinched loosely,
permitting components to rotate freely in the hole of the material; incorrect style of snap fastener; roll of
clinched eyelet fastener assembly contains more than three scores (splits).
4.2.3 Label and marking defects. Bar code omitted or not readable by scanner; human-readable
interpretation (HRI) omitted or illegible; bar code not visible on folded, packaged item; bar code causes
damage to the item. Marking omitted, incorrect, illegible, misplaced, or size of characters not as
specified.
4.2.4 Webbing defects. Any hole, cut, tear or smash in webbing, webbing not firmly and tightly woven,
edges frayed or scalloped; cut ends of nylon webbing not fused.
4.2.5 Hardware defects. Hardware broken or malformed, finish omitted, burrs, sharp edges, corroded
areas; area of thin or no film, i.e., bare metal exposed; enamel finish (where applicable) is not uniform
and adherent, i.e., objectionable orange peel, wrinkles, drops or streaks. Keeper fails to function or
engage with snap hook; any fastener not functioning properly, i.e., fails to snap closed, provide a secure
closure, or open freely.
4.2.6 Packaging defects. Any containers not packaged as specified and in accordance with the
contract or purchase order.
4.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order.
5. PACKAGING
5.1 Preservation, packing, and marking. Preservation, packing, and marking shall be as specified in the
contract or order.
6. NOTES.
6.1 Source of Government documents. Copies of military and Federal documents are available from:
Standardization Documents Order Desk
Bldg. 4D
700 Robbins Avenue
Philadelphia, PA 19111-5094
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business