A-A-55106A
2.1.4. Slide keeper. The slide keeper shall be flexible, black in color or as specified, 1/2
inches in length or commercial acceptable length and compatible with the lanyard.
2.2. Marking. Each whistle body shall be permanently and distinctly marked with the letters
"U.S.", the name of manufacturer or brand name and the year of manufacture. The size of the
letters shall be approximately 3/32 inch high.
2.3. Label/Tag. The Label/Tag shall be as specified in the contract or order.
3. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use
recovered materials to the maximum extent practicable, in accordance with paragraph 23.403
of the Federal Acquisition Regulation (FAR).
4. QUALITY ASSURANCE PROVISIONS
4.1. Product Conformance. The products provided shall meet the salient characteristics of
this commercial item description, conform to the producer's own standards and quality
assurance practices, and be the same product reserves the right to require proof of such
conformance.
4.2. Visual examination. The whistles shall be examined for the defects listed below.
DEFECTS: Any required component or design characteristic missing or not as specified
herein; any aspects of design, construction, assembly, function or finish not in accordance
with good commercial practice; color not as specified; free of flashing, burrs, scratches, dents,
cracks, cuts marking missing, incorrect, or illegible; measurement of item not as specified;
failure to perform, function, and/or fulfill intended purpose; bar code omitted or not readable
by scanner; human-readable interpretation (HRI) omitted or illegible; bar code not visible on
packaged item; bar code causes damage to the item; any item not packaged in accordance
with the contract or purchase order, any other defect that will adversely affect function,
performance, appearance or cause injury to the user.
4.3. Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase
order.
5. PRESERVATION, PACKING, AND MARKING. The preservation, packing, and
marking shall be as specified in the contract or order.
6. NOTES
6.1. Source of Government documents. Copies of Military and Federal documents are
available from:
Standardization Documents Order Desk
Bldg. 4D
700 Robbins Avenue
Philadelphia, PA 19111-5094
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business