A-A-55080A
3.6 Performance
3.6.1 Requirement for seam and crease strength. The breaking strength of the seam shall be not less
than 60 percent of the breaking strength of the film when tested as specified. The breaking strength at
the side creases of the cover shall not be less than 50 percent of the breaking of the film when tested as
specified.
3.6.2 Leakage requirement. The cover shall not leak or separate at the seam when tested as specified.
3.6.3 Requirement for label adhesion. Each cover shall have a label that is directly printed, stamped or
stenciled on the cover. The contents, size and the characters of the inscription, and the format shall be
as follows:
Item Description
- minimum of 18 points (approximately ¼ inch)
Contract Number
- minimum of 18 points (approximately ¼ inch)
Stock Number
- minimum of 18 points (approximately ¼ inch)
Size (when specified)
- minimum of 18 points (approximately ¼ inch)
Contractor's name (bottom of label)
- maximum of 18 points (approximately ¼ inch)
The label shall be clearly legible after being subjected to the ink adhesion test as specified. The label
shall be located midway (± 2 inches) between the sealed seam and the opening.
3.7 Workmanship. After completion, the finished covers shall be thoroughly clean, well finished, free
from gels, pinholes, holes, cracks and blisters, fish eyes, mottling, particles of foreign matter and
undispersed raw material. Raw edges shall be free from nicks and cuts.
4. Regulatory Requirements. The offeror/contractor is encouraged to use recovered materials to the
maximum extent practicable, in accordance with paragraph 23.403 of Federal Acquisition Regulation
(FAR).
5. Quality Assurance
5.1. Product Conformance. The contractor shall certify that the product offered meets the salient
characteristics of this description :that the product conforms to the producer's own drawings,
specifications, standards and quality assurance practices. The Government reserves the right to require
proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for,
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business