A-A-55177A
The strap fastener loops shall be brass," black", l-1/16 X 1/4 inch as shown in figure 1. The
buckles shall be non-slip 1-inch steel "black", as shown in figure 1. The side retaining snap hooks
shall be 1-inch wire body with a fixed loop eye. The cloth for the marking shall be impregnated
and coated with a permanent acrylic composition.
3.
Marking
3.1 "US" Epithet. The letters " US" shall be applied in the size characters and in the location
indicated in figure 1. The method of application may be direct printing, stamping or stenciling.
The marking medium shall be black and colorfast. The initial print shall be well defined, clearly
legible, and shall not show smearing, bleeding, or offsetting and shall not show objectionable
strike-through of the cloth to which it is applied.
3.2 Identification.. Identification markings shall be centrally located on one of the pad
covers. The identification marking shall contain the item nomenclature, contract number, national
stock number and contractor's name. The letters shall be ¼" high. The method of application
and medium requirements shall be the same as for the "US" epithet.
3.3 Label/Tag. Each item shall be individually bar-coded with a paper tag. The paper tag
shall be standard bleach sulfate having a basis weight of 100 pounds. The paper used for the tags
shall have a smooth finish too accept thermal transfer and direct printing. The tags shall have a
hole and shall be attached to each item by a fastener, clearly legible and readable by scanner. The
bar coding element shall be a 13 digit national stock number (NSN). The bar code type shall be a
medium to high code density and shall be located so that it is completely visible on the item when
it is folded and/or packaged as specified and so that it causes no damage to the item.
4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered
materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal
Acquisition Regulation (FAR).
5.
QUALITY ASSURANCE PROVISIONS
5.1 Certification. The products provided shall meet the salient characteristics of this
Commercial Item Description, conform to the producer's own drawings, specifications, standards
and quality assurance practices, and be the same product offered for sale in the commercial
market place. The Government reserves the right to require proof of such conformance prior to
first delivery and thereafter, as may be otherwise provided for under the provisions of the
contract, reliance on contractor QA systems shall not relieve the contractor of the responsibility of
ensuring that all products or supplies submitted to the government for acceptance comply with all
requirements of the contract.
5.2 Product Demonstration Model, When required, offerers shall submit samples of their
intended production. The Product Demonstration Model will consist of units independently
developed. Product Demonstration Models will be analyzed and evaluated by the government.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business